We are continuing to work hard to meet all of your needs and are ready to serve! We are following additional health and safety measures due to the current public health situation, COVID-19. Please don’t hesitate to reach out; we’re ready to help.

Zoeller M57 Automatic Mighty Mate 1/3 hp Sump Pump

Bill Metzger Plumbing is the company to call when you want a Zoeller M57. They sell, install and repair  Zoeller M57 Automatic Mighty Mate 1/3 hp Sump Pumps to the people of Orange County.

Zoeller M57 Automatic Mighty Mate 1/3 hp Sump Pump

PRODUCT DESCRIPTION
M57 Zoeller Automatic Mighty Mate 1/3 hp Sump Pump

  •  Non-Clogging vortex impeller.
  • Float operated, submersible (NEMA 6) 2-pole mechanical switch & variable level long cycle systems available.
  • UL Listed 3-wire cord plug 9 ft. standard for automatic, 15 ft. standard for nonautomatic.
  • Corrosion resistant powder coated epoxy finish.
  • No sheet metal parts to rust or corrode.
  • Stainless steel screws, switch arm, guard and handle.
  • No screens to clog.
  • Watertight neoprene ring between motor and pump housing.
  • Solid buoyant polypropylene float.
  • Motor – 60 Hz, 1550 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protected.
  • Upper and lower sleeve bearings running in bath of oil.
  • Entire unit pressure tested after assembly.
  • Carbon and ceramic shaft seal.
  • Maximum temperature for effluent or dewatering – 130°F (54°C).
  • Passes 1/2″ inch spherical solids.
  • 1 1/2″ NPT Discharge.
  • On point – 7 1/4″
  • Off point – 3″.
  • Major width – 10 3/32″.
  • Height – 10 1/16″
  • All cast iron construction.
  • Stainless steel guard & handle.
  • Bearing – lower & upper oil fed cast iron.
  • Cast iron impeller

 

Call Bill Metzger Plumbing for a Zoeller M53 Sump Pump at (949) 492-3558

GET A QUICK QUOTE

Call Us