Get a Quick Quote

→ Click here to close ←

x
We are continuing to work hard to meet all of your needs and are ready to serve! We are following additional health and safety
measures due to the current public health situation, COVID-19. Please don’t hesitate to reach out; we’re ready to help.

Zoeller M267 Sump Pump

When you have residential or commercial wastewater issues, you can count on the Zoeller M267 pump and Bill Metzger Plumbing to deliver the very best solutions.
Bill Metzger Plumbing’s commitment to top quality offers years of service and durability.
–

Zoeller M267 Description

Zoeller 267 Waste-Mate Submersible Sump Pump for Sewage/Effuent or Dewatering 1/2 HP Single phase, 115V10 ft cordFloat operated, submersible (NEMA 6) 2-pole mechanical switch, Durable cast construction, ASTM Class 25 cast iron, switch case and pump housing Plastic baseNon-Clogging Vortex Impeller Design. Plastic impepeller, stainless steel screws, bolts, handle, guard and arm and seal assemblyNeoprene square ring & gasketOil-filled, hermetically sealed motorOil lubricated bearingsCarbon and ceramic shaft sealPasses 2″ spherical solids2” female and 3″ NPT male dischargen point: 12″Off point: 4″Corrosion resistant powder coated epoxy finish. Completely submersible, watertight and dust tight.
–

Description of the Zoeller 267

NOTE: This model contains a cast iron impeller
Submersible sewage/*effluent or dewatering pump
Features:

  • Float operated, submersible (NEMA 6) 2-pole mechanical switch
  • Durable cast construction, ASTM Class 25 cast iron, switch case and pump housing
  • Cast iron base on models 267 and 268
  • Engineered plastic base on model 266
  • Non-Clogging Vortex Impeller Design
  • Comes with cast iron impeller
  • Not affected by materials normally found in drainage and sewage pumps
  • Stainless steel screws, bolts, handle, guard and arm and seal assembly
  • Neoprene square ring & gasket
  • Oil-filled, hermetically sealed motor
  • Oil lubricated bearings
  • Carbon and ceramic shaft seal
  • Passes 2″ spherical solids
  • 2″ female and 3″ NPT male discharge
  • On point: 12″ (automatic units); Off point: 4″ (automatic units)
  • Corrosion resistant powder coated epoxy finish
  • Completely submersible
  • Watertight and dust tight
  • Automatic reset thermal overload protection (1 Phase only)
  • Reserve powered design. For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

–

Specs for the Zoeller M267

If you are in Orange County, and have any questions about the M267 call Bill Metzger Plumbing at (949) 492-3558 

Type: Auto
Application: Sewage
Sewage Waste Transfer
Effluent
Material: Cast Iron
Horse Power:

Horse Power

Horse power is a unit of power, with one horse power equalling 745.7 watts.

 1/2
Voltage:

Voltage

Voltage, or volts, is a measurement of the difference between two electric fields (in heating terms, the difference between the Earth’s electrical field and the electricity running through your wires).

 115v
Amperage:

Amperage

Amperage, or amps, refers to the amount of electricity flowing through the wires.

 10.4
Phase: 1
RPM: 1725
Cord Length: 10 ft
Cord Type: UL Listed 3-Wire Neoprene Cord & Plug
Height: 14-9/32″
Features: Cast Iron Impeller
Flow at 5 FT Head: 128 GPM
Flow at 10 FT Head: 89 GPM
Flow at 15 FT Head: 50 GPM
Approvals: UL/CSA
Weight (lbs): 47.5 lbs
Discharge: 2″
Solids Size: 2″
Shutoff Head (ft.): 21.5
Call Us